电梯门套施工方案

Construction plan for elevator door frames

国彩APP　　现在的建筑里面,在建设的时候都会设计上电梯。这个时候就会需要用到电梯门套,电梯门套的种类也是有很多种的,一般都是根据整体的设计去选择选用什么样子的,以及什么材质的电梯门套的。今天我们就来了解电梯门套施工方案。

国彩APPElevators are often designed during construction in modern buildings. At this point, elevator door frames will be needed, and there are many types of elevator door frames. Generally, the selection of what kind and material to use for elevator door frames is based on the overall design. Today we will learn about the construction plan for elevator door frames.

　　电梯门套施工方案

Construction plan for elevator door frames

　　一、石材表面处理,石材表面应干燥,含水不大于百分之八。

1、 The surface treatment of stone should be dry, with a moisture content not exceeding 8%.

　　二、石材安装前先对石材进行挑选、使用一个门套石材色泽、花纹一致、挑出色差。

2、 Before installing the stone, select the stone and use a door frame to ensure that the color and pattern of the stone are consistent, and identify any color differences.

国彩APP　　三、对安装石材的结构表面清理,放水平线、垂直线。

3、 Clean the surface of the structure for installing stone, and lay out horizontal and vertical lines.

国彩APP　　四、用台钻打眼、每块板上、下面打眼,孔位打在板中间。

4、 Drill holes with a table drill, both above and below each board, with the holes located in the middle of the board.

　　五、用膨胀螺栓把角架固定,再把挂件固定在角架上。

国彩APP5、 Fix the angle bracket with expansion bolts, and then fix the hanging parts onto the angle bracket.

国彩APP　　六、石材开槽,用大理石胶把石材固定在挂件上。

6、 Cut grooves in the stone and fix it onto the pendant with marble glue.

　　七、立面垂直,光面平整,接缝平直,接缝宽度。

7、 Vertical facade, smooth surface, straight seams, and wide seams.

　　八、全部安装完后,要对表面石材一次性清理。

国彩APP8、 After all installations are completed, the surface stone should be cleaned in one go.

本文由 泰安工地电梯门套 为您精心提供，如想了解更多请点击我们的网站：http://thebytesite.com，我们将会以最大的热情为您解答!

This article is carefully provided by the elevator door frame of Tai'an construction site. If you want to learn more, please click on our website: http://thebytesite.com We will answer you with the greatest enthusiasm!